When you work in an industry where an oil spill may happen, it is essential to be prepared. There are several ways to prepare yourself and your company. After reading this article, you can check out https://diamondtservices.com/ to find out more information.
It is important that you know and understand the difference between passive and active spill containment. Active containment is when a person has to take any action to put something in place to contain the spill. There may already be a spill before active containment happens. It also requires someone to be near or go to the spill when it happens. That may not happen quickly enough. Some actions that are considered part of active containment are putting a cover on storm drains before oil transfer. Placing covers on storm drains once there has been a spill and while someone is responding to the spill. Someone may need to use a spill kit if there is an oil spill. You may need to use a team to respond to a spill when there is an oil spill. Another part of active containment is closing a gate valve before a discharge of oil. It is critical that if you plan to use active containment, that you have to designate people to handle these steps.
For passive containment, you are putting a process in place before the spill happens. You have to put these devices in place at some point before the spill occurs, but once they are in place, they can control the spill on their own. Some of these devices can be permanent or semi-permanent. These devices offer constant protection, and you do not have to watch over them. This is especially helpful with you have many sites, and people are not always at those sites. Items that are part of passive containment include retaining walls, drip pans, decks, pallets, and retention ponds. There are other types of containment, including tanks, containers, waste storage, and processes that limit the potential for the release of chemicals. This helps to reduce or limit the amount of time you and your business spend cleaning up spills and messes. Under some conditions, the material that was spilled can often be recovered and reused at a later time. These types of containment options are intended for your business to handle the worst-case situation that may occur.
